Your Cart

Stanley Solis K100 Edge Wood Pellet Claret Stove | K100SPCTFLT

Stanley Solis K100 Edge Wood Pellet Claret Stove | K100SPCTFLT
Special Offer
Stanley Solis K100 Edge Wood Pellet Claret Stove | K100SPCTFLT
This offer ends in:
Ex Tax: €1,543.90

  • Stock: In Stock
  • Brand: Stanley
  • Model: 411219

Stanley SOLIS K100 Edge Wood Pellet Claret Stove | K100SPCTFLT

Product Description

The Stanley SOLIS K100 Curve Pellet Claret Stove is the ideal heating solution for your home. It comes in a number of different finishes and provides between 3kW and 8kW heat output to the room and is fully remote controlled. The Stanley K100 pellet stove can also withstand high temperatures due to the high quality of the steel. It is available to purchase now from Telfords Portlaoise (Authorised Stanley Centre) located in Portlaoise, Co. Laois, Ireland. Call into our Stanley Showroom TODAY. 

Pellet Information
Pellet fuels (or pellets) are biofuels made from compressed organic matter or biomass and are suitable for use with wood pellets certified to EN 14961-2 grade A1 with a diameter of 6 mm and a length that can range from 10 to 30 mm. As fuel, pellets are completely environmentally friendly, as they are made entirely of natural wood, without glue or other chemical compounds. Pellets have a high calorific value (4.7 to 5.3 kW/kg) which means they produce high heat output comparable to dry wood or coal. Pellets also have a low moisture content which helps consistent combustion efficient. Use only good quality pellets, without sawdust. The small quantities of sawdust normally present at the bottom of the bags should not be emptied into the tank, but should be held inside the bag while pouring the pellets carefully so that the sawdust remains inside.

Ecodesign Stoves
Ecodesign is the European-wide programme to lower emissions to improve air quality from a range of appliances that use energy including stoves. Ecodesign labelling came into force 1st January 2022 and applies to both wood burning and solid fuel stoves. The Ecodesign Directive Covers: Minimum efficiency rating of 75% for stoves, Reduction of CO (Carbon monoxide) –88%, New limit for emissions of NOx, Introduction in requirements for Particulate matter and organic gaseous compounds. All our Stanley and Bilberry Solid Fuel, Wood, Pellet and Gas stoves and inserts are Ecodesign certified.

Product Specification

  • Maximum Heat Output 8kW to the room
  • High Efficiency up to 96% - almost 4 times more efficient than an open fire
  • Self-cleaning burner means reduced waste in your ash pan
  • 15Kg internal hopper runs for up to 22 hours from a fill of pellets
  • Pellet consumption min 0.68 kg/h max 1.80 kg/h
  • Fully adjustable in terms of time and temperature including sleep timer
  • Programmable controller with up to 6 on/off times per day
  • Flue outlet size 80mm
  • Rear flue outlet only
  • Approved to EN 14785 standard
  • External air compatible
  • Colour: Claret
  • Includes commissioning
  • Ecodesign 2022 ready

Technical Specifications

  • Fuel: Pellet
  • Function: Room Heating
  • Depth: 555mm
  • Width: 558mm
  • Height: 910mm
  • Weight: 82kg
  • Flue Outlet Diameter: 80mm
  • Flue Requirement: Rear

Optional Extras

  • Pellet Wi-Fi Kit
  • External air supply kit

Also Available

Additional Information

Write a review

Note: HTML is not translated!
Bad Good