Menu
Your Cart

Stanley Solis K2300+ Boiler Wood Pellet Stove Claret | K2300SPCT

Stanley Solis K2300+ Boiler Wood Pellet Stove Claret | K2300SPCT
Special Offer
Stanley Solis K2300+ Boiler Wood Pellet Stove Claret | K2300SPCT
This offer ends in:
Day
Hour
Min
Sec
€4,249.00
€4,650.00
Ex Tax: €3,454.47

  • Stock: In Stock
  • Brand: Stanley
  • Model: 93157

Stanley SOLIS K2300+ Boiler Wood Pellet Stove | K2300SPCT


Product Description

The Stanley SOLIS K2300+ central heating pellet stove heats up to 16 standard radiators, has a 45kg internal hopper with 41 hours run time and has a 7-day timer and is 94% efficient. Efficiency and control at the touch of a button.  It is available to purchase now from Telfords Portlaoise (Authorised Stanley Centre) located in Portlaoise, Co. Laois, Ireland. Call into our Stanley Showrooms TODAY. 

Pellet Information
Pellet fuels (or pellets) are biofuels made from compressed organic matter or biomass and are suitable for use with wood pellets certified to EN 14961-2 grade A1 with a diameter of 6 mm and a length that can range from 10 to 30 mm. As fuel, pellets are completely environmentally friendly, as they are made entirely of natural wood, without glue or other chemical compounds. Pellets have a high calorific value (4.7 to 5.3 kW/kg) which means they produce high heat output comparable to dry wood or coal. Pellets also have a low moisture content which helps consistent combustion efficient. Use only good quality pellets, without sawdust. The small quantities of sawdust normally present at the bottom of the bags should not be emptied into the tank, but should be held inside the bag while pouring the pellets carefully so that the sawdust remains inside.

Ecodesign Stoves
Ecodesign is the European-wide programme to lower emissions to improve air quality from a range of appliances that use energy including stoves. Ecodesign labelling came into force 1st January 2022 and applies to both wood burning and solid fuel stoves. The Ecodesign Directive Covers: Minimum efficiency rating of 75% for stoves, Reduction of CO (Carbon monoxide) –88%, New limit for emissions of NOx, Introduction in requirements for Particulate matter and organic gaseous compounds. All our Stanley and Bilberry Solid Fuel, Wood, Pellet and Gas stoves and inserts are Ecodesign certified.


Product Specification

  • Max 18.8kW boiler output
  • Heats up to 16 standard radiators
  • High Efficiency up to 93.8% - almost 4 times more efficient than an open fire
  • Self-cleaning burner means reduced waste in your ash pan
  • 45kg internal hopper runs for up to 41 hours from a fill of pellets
  • Pellet consumption min 1.1 kg/h max 5.1 kg/h
  • Fully adjustable in terms of time and temperature including sleep timer
  • Programmable controller with up to 6 on/off times per day
  • Flue outlet size 100mm
  • Rear flue outlet only
  • Approved to EN 14785 standard
  • External air compatible
  • Colour: Claret
  • Includes commissioning
  • Ecodesign 2022 ready
  • A+ Energy Label


Technical Specifications

  • Fuel: Wood Pellet
  • Function: Central Heating
  • Depth: 767mm
  • Width: 644mm Flat/746mm Curved
  • Height: 1255mm
  • Weight: 219kg
  • Flue Outlet Diameter: 100mm
  • Flue Requirement: Rear Only


Optional Extras

  • External air supply kit


Also Available



Additional Information

Write a review

Note: HTML is not translated!
Bad Good
Captcha